If you decide that you do want to preserve some VHS tapes for posterity, you’ll need a VHS video player, so if you’ve already got rid of your old one you’re going to have to borrow or buy one. Despite being obsolete you can still pick them up, both new and second hand. The latter will cost next to nothing but do bear in mind that, like most equipment with mechanical parts, there’s no guarantee that a second-hand recorder will offer acceptable performance. It’s well worth asking for an unwanted player for free on sites such as Freegle and Freecycle.
How can I convert VHS to DVD?
Check your old tapes and if they’ve been gathering dust – literally, that is – try to clean as much as you can from the part of the cassette where the tape is exposed to prevent it being drawn inside once you play it. Also, make sure the spindles haven’t seized up. If they have, try to get them moving by hand before playing the offending tape. If you don’t want to buy any gear or can’t afford the time to digitise all your VHS tapes, various companies provide a commercial service but prices will soon add up if you have lots of tapes. Assuming you have a VHS player and want to tackle the job yourself, you’ll need some way to get the video off your tape and onto your PC. The MAGIX Rescue Your Videotapes package is a good option, though not cheap at £39.99 (despite seeming a good deal because of the hugely inflated RRP). But it comes with everything you need to make this process as easy as possible, so you don’t have to worry about buying any other equipment. The software is very easy to use and will attempt to enhance the quality of the audio and video. It will give you real-time playback of your video tape, so you can customise the experience as you wish. There’s a tutorial page as well, so if you’re stuck then you can follow one of the simple guides to get you going again.
There are cheaper methods of making this conversion, and one option is to buy or use a VHS/DVD combo player (again widely available second hand) since most of these will let you record from VHS directly to a DVD which can then be ‘ripped’ to a digital file on your laptop if that’s what you want. A similar solution is to connect the video output on a VHS player to the video input of a DVD recorder. For this you’ll need an A/V cable – either Scart, or a cable with composite video and RCA (phono) audio connectors. If you don’t have a DVD recorder then your PC will provide the means of digitising your VHS tapes and, optionally, burning it to a DVD. However, you will need some additional video capture hardware and its associated software.
If you want to go down this route, here are the steps to take.
How do I convert VHS to digital?
Step 1. Connect your VHS video player to your PC using the cable or cables supplied with your chosen software. It should look something like the photo above. You may need a special Scart cable which has the red, white and yellow cables, or your video player may already have these outputs. (You won’t be able to use front-mounted white, red and yellow connectors are these are almost always inputs – not outputs.) Step 2. The process of digitising your VHS tapes should be straightforward enough. Start the recording software (which comes with the USB capture dongle) on your computer and play your VHS tape from the point where you want the recording to start. Step 3. Stop the recording software at the end of the video, and stop the video VHS cassette.. Step 4. If you’re burning the captured video to DVD, your software should provide an option for this, but if not, you can use something like Freemake. This will take the digital video captured from your VHS tape and record it to the DVD. There’s little point in burning the file to Blu-ray as the poor quality of VHS makes it a waste of money. DVDs are cheaper and offer better quality than VHS anyway.
How can I watch the captured video on my phone or tablet?
Freemake supports most video formats, so do read our detailed guide to converting videos to different formats if you want to convert the captured video to MP4 which is supported by phones and tablets. To watch the video on your phone or tablet, it’s as simple as connecting the device to your computer using its USB cable. Then, if you have an Android device, look for a notification for USB options as – by default – it will only charge and not allow file transfers. The options will vary between Android devices, but once you’ve set the USB mode for file transfers, you should see it appear as a new drive in Windows File Explorer. Copy the MP4 video file you saved earlier to the Videos or Movies folder on your Android device. It should then be visible in your default video app. If you have an iPhone, you can use iCloud Drive to store the video and then access it via the Files app. Another option is to import the MP4 video into your iTunes library, then connect your phone (or iPad) to your computer and drag and drop the file from your library to the device.
You might also like to know how to convert vinyl to digital.
